1.顶端弧度侧围板,壁厚不低于1mm |
The wall thickness of the arc side panels on the top cannot be less than 1mm. |
2.主体框架型材采用型材标号(6061) |
Profiles used in the main frame are labeled (6061). |
3.显示屏采用电子看板显示,控制系统预留软件升级接口 |
Display screen adopts Digital Signage and software update interface is reserved in the control system. |
4.皮带及挡板采用2mm厚度PVC材质工业输送带(灰色)挡板采用ABS材料,灵活调整 |
Belts are PVC industrial conveyor belts that are 2mm in thickness (gray) and baffles use ABS materials and can be adjusted flexibly. |
5.驱动滚筒:滚筒表面固定防滑层特殊材料,防止打滑 |
Head roll: Special non-skid finish materials are applied on the surface of the head roll to prevent skid. |
6.皮带下端支撑方式:采用托轮支架方式,托轮须采用旱冰鞋同等级别滚轮 |
Under-belt support method: Supporting roller bracket is used and the roller must be of the same grade with that of the roller skates. |
7.尾端滑槽设计:输送带上的垃圾方便导入清理位置,防止垃圾在流水设备内堆积 |
Design of the tail-end chutes: It is convenient for transporting the rubbish on the conveyor belts to the cleaning area to prevent it piling in the assembly line equipment. |
8.多功能投料转盘:采用高硬度的PP920材质 |
Multifunctional feeding rotating table: Use high-hardness PP920 materials. |
9.变频马达:采用进口品牌750W电机,速比1:50 |
Inverter motor: Use 750 W electric motor of imported brand and with speed ratio being 1:50. |